AXIL NA1101 Manuel D'utilisateur page 36

Electric supply
· Please unplug the product in case of prolonged non-use.
· This product is intended to be used under temperate climate and should not be used under tropical
climate.
· If the supply cable is damaged, it must be replaced by the manufacturer or qualified after-sales
personnel to avoid any danger.
· This product must be connected to an electrical supply 230V ~ 50Hz.
· The plug must be accessible after installation.
This product is compliant with directives 2006/95/CE (abrogating the
directive 73/23/CEE modified by the directive 93/68/CEE) and 2004/108/
CE (abrogating the directive 89/336CEE).
This logo set on the product means that the recycling of this apparatus
comes within the framework of the directive 2002/96/EC of January 27,
2003 concerning the waste on electrical and electronic equipment (WEEE).
· The presence of dangerous substances in the electrical and electronic
equipments can have potential consequences on the environment and
human health in the cycle of reprocessing this product.
· Therefore, at the end of its lifetime, this product shall not be disposed
with other non-recycled waste.
· As the end user, your role is of prime importance in the cycles of re-using,
recycling, and other forms of valorization of this electrical and electronic
equipment. Local authorities and resellers have set special procedures for
the purpose of collecting and recycling this product.
· You have the obligation to use the selective waste collection systems put
in place by your local authorities.
4