Bluetooth Operation - Boost STUPDJ Mode D'emploi

needs to be replaced as soon as possible.
Notes:
1. The effective range of the wireless microphone is 15m. Do not use over that range.
2. Do not use two microphones working on the same frequency or crosstalk and interference will occur.
3. If you use more wireless microphones at the same time, they must be set to different frequencies
and should be kept away at least at 50m.
4. Don't put the device too close to a DVD/CD/VCD player as they have strong frequencies and might
affect the microphone.
Built-in recording function
1. In Aux mode: Plug in a USB/SD card and press the record key to go to record function. The screen shows
00:01 to indicate that recording has started. If you connect the USB/SD card for the first time to the
speaker, the system will create a folder and the speaker will save and play the recorded file automatically
in this folder.
2. In USB/SD play mode: Press the record key to go into recording mode. The current sound output will stop
and go to mute status. The screen shows "Recording". The recording will start when the screen displays
00:01. You can use a microphone to record. If you connect the USB/SD card for the first time to the
speaker, the system will create a folder named VOICE.
USB/SD Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could
generate interference. If the speaker stops working, switch it off and on again, or unplug USB/SD/MMC
card and re-plug it. The speaker should be back to normal status.
Supported music formats: MP3, WMA
1. USB port: plug and play
2. SD/MMC slot: plug and play
3. Mode key: press to cycle through external AUX sound source/USB/SD card/FM/BLUETOOTH
4.Play/pause: Press to play, press to pause, press again to resume play.
5. Previous/Next: During play press once to go back to the beginning of the track or to the next track.
6. Repeat: During play press once to repeat the current song, press twice to repeat all songs.

BLUETOOTH OPERATION

1. Turn on the unit and press the MODE button on unit or on the remote control to select the Bluetooth
function. The display shows "BLUE".
2. In Bluetooth mode, the symbol
mode.
3. Activate the Bluetooth feature on the external device to be paired.
4. Initiate a search for devices. The device shows up as " BOOST-STUPDJ ".
5. Select it and enter the password "0000" if required.
6. Press the PLAY button on the unit or the   key on remote control, to start playing and the buttons
NEXT and PREV, or the keys  and  for the selection of songs.
Charging Procedure
It takes 6-8 hours to fully charge the battery. Unplug the adaptor after charging is completed. Don't
overcharge the battery! During the charge, the charge indicator will flash. Once the battery has been fully
charged, the indicator stops flashing.
Note: Please charge as soon as the battery runs low. If you don't use the unit for a longer period of time,
recharge the battery regularly in order to avoid damage to the battery.
©Copyright LOTRONIC 2016
on display will start flashing, the system automatically enters search
BOOST-STUPDJ 4