Description Of Symbols; Before Starting The Equipment - Matrix EJS 800-1 Traduction De La Notice Originale

5. Description of symbols

Pay attention to all the signs and symbols shown
in these instructions and on your tool.
Make a note of these signs and symbols. If you
interpret the signs and symbols correctly, your
work with the machine will be safer and better.
Important.
Read the instructions for use before
starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, strong gloves.
Always use breathing apparatus when
machining materials which generate
dust.
End of life machines contain valuable
materials and therefore they should not
be placed in household waste.
We would ask you to play your part in
protecting resources and help protect
the environment by returning this
machine to a return point (if one is
available) when it reaches the end of its
life.
6. Layout
1. Knurled screw for speed control
2. Locking button
3. ON/OFF switch
4. ON/OFF switch for laser
5. Power cable
6. Adapter for dust extraction system
7. Adjustable soleplate
8. Selector switch for pendulum action
9. Dial scale for soleplate
10. Guide roller
11. Parallel stop
12. Saw blade
13. Locking screws for parallel stop
14. Blade holder
15. On / off switch for suction
16. Laser
17. Allen key
18. Locking screw for soleplate

7. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
7.1 Changing the saw blade (Fig. 2/Item 12)
Important!
• You can fit or replace saw blades without using
any other tools.
• Pull the mains plug before you fit or replace a
saw blade.
• Set the selector switch for pendulum action (8)
to position 3.
• Turn the blade holder (14) and insert the saw
blade (12) into the blade holder (14) as far as the
stop (Fig. 4). The teeth on the saw blade must be
pointing forwards.
• Check that the saw blade (12) is securely
mounted in the blade holder.
• Follow the instructions above in reverse order to
31