GE 21 Manuel D'utilisation page 15

Inserting the door panels.
Remove the Door Handle Trim
Open the freezer door and remove the single screw from the top handle cap.
1
Do not try to remove the cap.
Loosen the screws across the top trim of the door approximately 1/4² (6 mm).
2
This allows the top handle cap to slip out from under the top trim.
Remove the 5 screws from the full-length handle. Keep all screws.
3
Extra replacement screws for the door trim can be found in the storage drawers.
Carefully remove the freezer door handle along with the top handle cap.
4
NOTE: Be careful not to damage the bottom handle cap when removing the freezer door
handle. It is attached to the full-length handle with a screw and does not need to be
removed from the handle.
15