Product Overview; Connection Configuration At The Tv - Renkforce renkCast 2 Mode D'emploi

6. Product Overview

a) Connection configuration at the TV
Micro-USB IN
USB
plug-in mains unit
• The USB plug-in mains adapter shown in the connection configuration is not en-
closed.
• The plug-in mains adapter serves only voltage supply for the renkCast 2, if your TV
has no matching USB connection with voltage supply and a current of 1 A.
• The renkCast 2 must be connected to a free HDMI input of your TV. You then need
to select the right HDMI input for transmission of the video and audio signal of the
dongle at the TV under "Source", using your remote control.
• To make the TV internet-capable and to use many additional features, just connect
the renkCast 2 to an available WiFi network. This is also shown on the screen as a
schematic after you select the right HDMI connection.
• This simplifies the entire setting process, which you perform after connection ac-
cording to the configuration shown on your TV unit, at the beginning.
WiFi aerial for
connection to the
WiFi network
TV unit with HDMI
connection
19