Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
7.
Bringen Sie die Seitenabdeckungen (2) an den
Geräteseiten an. Platzieren Sie die vorderen Türen
(3) an der Vorderseite des Produkts und installieren
Sie sie auf der ausgewählten Seite.
REINIGUNG UND WARTUNG
•
Verwenden Sie zur Reinigung der Oberfläche
ausschließlich Mittel ohne ätzende Inhaltsstoffe.
•
Benutzen Sie einen weichen Lappen zur Reinigung.
•
Zum Reinigen darf man keine scharfen und/
oder Metallgegenstände (z.B. Drahtbürste oder
Metallspachtel) benutzen, weil diese die Oberfläche
des Materials, aus dem das Gerät hergestellt ist,
beschädigen können.
DE
EN
U S E R M A N U A L
TECHNICAL DATA
Parameter description
Parameter value
Product name
DATA CABINET
Model
STAR_DC.
STAR_DC.
19.6.S_01
19.15.S_01
Protection rating IP
IP20
Working height [U]
6
15
Width of equipment
19
to be installed ['']
Maximum load [kg]
60
Dimensions [mm]
600x460x370
600x450x770
Weight [kg]
15
22,7
Product name
DATA CABINET
STAR_
STAR_
Model
DC.19.15.S_02
DC.19.9.S_02
Working height [U]
15
9
Width of equipment
19
to be installed ['']
Maximum load [kg]
-
60
Dimensions [mm]
600x450x770
600x450x500
Weight [kg]
24
19
1. GENERAL DESCRIPTION
LEGEND
Read instructions before use.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign).
Only use indoors.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
2. USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in serious injury or even death.
The terms „device" or „product" are used in the warnings
and instructions to refer to DATA CABINET.
SAFETY GUIDELINES
•
If this device is used together with another equipment,
the remaining instructions for use shall also be
followed.
•
Do not overload the device.
•
Do not cover the ventilation openings.
3. USE GUIDELINES
The data cabinet is used as an element of server room
equipment for organized storage of electronic devices. The
product is intended for home use only!
The user is liable for any damage resulting from
unintended use of the device.
5
CONSTRUCTION OF THE DEVICE
ATTENTION! This product's view can be found on the
last pages of the operating instructions (pp. 15).
Name
Quantity
1
Top plate
1
2
Side covers
2
3
Front door
1
4
Bottom plate
1
5
Back plate
1
6
Back strip
1
7
Horizontal rack rail
4
8
Vertical rack rail
4
9
Frame
2
10
Assembly rail
2
Accessories:
•
Allen key
•
M8x12 hex bolts
•
M8 flange nuts
•
M6 x12 bolts
•
M6 nuts
•
M4x8 self-tapping screws
•
Washers
•
Key
ASSEMBLING THE DEVICE
ATTENTION! This product's exploded view can be
found on the last pages of the operating instructions
(pp. 16).
1.
Place the frames (9) on the bottom plate (4) and use
two horizontal rack rails (7), M8x12 hex bolts and M8
flange nuts to connect the parts together.
2.
Place the top plate (1) on the connected parts, turn it
upside down so that the top plate serves as the base
and connect the parts with two horizontal rack rails
(7), M8x12 hex bolts and M8 flange nuts.
3.
Using washers, M6x12 screws and M6 nuts connect
the vertical rack rails (8) with the horizontal rack rails
(7).
4.
Connect the mounting rails (10) with the vertical rack
rails (8) using M6x12 screws and M6 nuts.
5.
Use the M4x8 self-tapping screws to install the
bottom plate (4).
6.
Use the M4x8 self-tapping screws to install the back
rail (6).
7.
Place the side covers (2) on the sides of the cabinet.
Place the front door (3) on the front of the product
and install on the selected side.
CLEANING AND MAINTENANCE
•
Use only non-corrosive cleaners to clean the surface.
•
Use a soft cloth for cleaning.
•
Do not use sharp and/or metal objects for cleaning
(e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
Publicité
Table des Matières
