Camera Installation And Accessorization; Installation; Accessories; User Settings - Thales ANGENIEUX EZ Série Manuel Utilisateur

3 INSTALLATION ON CAMERA AND ACCESSORIZATION

3.1 Installation

- Remove the rear cap (11)
- Make sure the rear element is clean
- Mount the zoom on stand with standard support
- Make sure the camera mount and the lens mount match and are
clean
- Locate the index finger on the camera
- Align the index of the zoom lens with the index of the camera
- Insert the lens into the camera mount and lock the camera mount
- Remove the front cap (1)
- Install other optional accessories

3.2 Accessories

The lenses of the EZ-Series Type family are delivered as standard with
a PL mount.
Optional frames can be purchased separately:
- 0320810: E mount
- 0320811: EF mount
- 0320812: PL mount
Motors developed by MOVCAM are also available
- 0321114: MSU-1 (3 motors, iris, focus and focus)
- 0321116: MSU-1A (1 focal motor)

3.3 User settings

Warnings:
Perform all user adjustments in a clean and dry place.
Use the specified tools.
Pay attention to the optical and mechanical elements when handling them
to avoid degradation.
17