MYDLINK DCS-8600LH Guide De Démarrage Rapide page 8

Outdoor Camera Mounting instructions
1. Place the baseplate at the desired location,
assuring that it is at least 20cm from the ceiling.
Make sure the screw is facing up and the holes
are level. Use a pencil to mark the holes.
2. Using a 6 mm drill bit, drill two 25 mm deep
holes over the pencil marks. For a plaster,
drywall, or concrete wall, insert the plastic
anchors to support the screws first.
3. Place the baseplate over the holes. Use the
supplied screws to attach the baseplate to the
wall.
4. Align the large top screw with the largest hole
on the snap mount. Slide the mount down to
lock into place.
5. Attach the back of the camera to the mount.
Adjust the angle as desired.
8
1
2
3
4
5
DCS-8600LH