Change Lamp; Beam Angle; Ca-16/ Ca-416 - Wild tech WT-KLD Manuel D'utilisation

WT- IFO
Inferno is a unique projector creating flame effects to produce a blazing inferno. It's a great effect to set any venue
on fire, perfect for clubs, pubs, bars, parties, etc.
• Focus adjustable and easy lamp access door.
Specification:
• Voltage: AC 120V~60Hz 230V/240V/250V~50Hz/60Hz
• Fuse: 20mm glass 250V T6.3A / 20mm glass 250V T5A
• Bulb: ELC 24V 250W
• Dimension: 270 x 192 x 120 mm
• Weight:: 7.2 kgs(WT-WAV) / 7 kgs(WT-IFO)

9.1 Change lamp

• Always switch off the mains supply and never handle the lamp or luminaire when it is hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with denatured alcohol and wipe with
a lint free cloth before installing.
• Pull the socket off the lamp. Do not pull the wires.

9.2 Beam angle

WT-WAV is best to be placed 5 meters from wall, and from this distance the light effect will cover the area of 4 m
x 4 m.
WT-IFO is best to be placed 5 meters from wall, and from this distance the light effect will cover an area of 3.1 m x
3.1 m.

10. CA-16/ CA-416

CA-16
• Power input: DC 9V 500mA Min.
• 16-Channels controller with 16 buttons and indicators,very easy to use.
• The Wild Tech controller can perfectly work with CA-416 for best control of 16-channel power on/off.
• 16 channels DMX output.
• Dimension: 482 x 63 x 44 mm
• Weight: 1 kgs
CA-416
• Power supply: DC 9V 500mA Min.
• Bulb: 6.3A per channel(Max.).total 15A.
• 4-Channel switch pack with DMX input/output.
• Dip switches for DMX address setting.
• Main input: AC 120V/230V +/- 10% with Maximum 15A fuse holder.
• Output: 6.3A per channels for each socket.
• 4 LEDs indicate the outputs on both the front and back panels.
• 1 Power indicator on the back panel.
• Dimension: 480 x 100 x 88 mm
• Weight: 2.4 kgs
Page 24