Wt-Kld; Change Lamp - Wild tech WT-KLD Manuel D'utilisation

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
♦
Never touch bulb with bare fingers as it is very hot after using.
♦
Hot lamp explosion hazard. Do not open the unit within five minutes after switching off.
♦
Do not start on the unit without bulb enclosure or housing are damaged.
♦
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
♦
Do not look directly at the light while the bulb is on.
♦
There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself.
In the unlikely event your unit may require service, please contact your nearest dealer.
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to
avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the
unit is secure and is able to support a weight of 10 times of the unit's weight. Also always use a safety cable
that can hold 12 times of the weight of the unit when installing the fixture.
The installation must be carried out by qualified service people only. The device should be installed out of
reach of people and outside areas where persons may walk by or be seated.
3. WT- KLD
Kaleido is a unique 250W kaleidoscopic effect that projects a swarm of swirling patterns. Comes with great built-in
programs with auto movement or sound activation. It's linkable, performing synchronized light show, perfect for
discos, clubs, bars, and parties.
• Precise optics with special gobo / color wheel.
• Linkable by using stereo cable with 3.5mm stereo
jack ( optional )
• Focus adjustable and fan cooled.
• Optional easy controller CA-8 for many lighting shows .
Blackout the unit
Stand by
Speed of gobo wheel and
mirrored-tunnel:
Function
Fast and slow
Sound
Mode
(LED off )
Specification:
• Voltage: AC 120V~60Hz 230V/240V/250V~50Hz/60Hz
• Fuse: 20mm glass 250V T6.3A / 20mm glass 250V T5A
• Bulb: ELC 24V 250W
• Dimension: 306 x 263 x 140 mm
• Weight: 8 kgs

3.1 Change lamp

• Always switch off the mains supply and never handle the lamp or luminaire when it
is hot.
• Do not touch the bulb with bare hands. If this does happen, clean the lamp with
denatured alcohol and wipe with a lint free cloth before installing.
Warning
Caution
Rigging the fixtures
Speed of gobo wheel and
mirrored-tunnel:
Fast and slow
Auto
(LED on)
Pull the socket off the lamp.
Do not pull the wires.
a.) Adjust gobo wheel rotating direction
and speed.
b.) Adjust mirrored-tunnel rotating
direction and speed.
Latch
(LED blinking)
Page 18