Fcc Notice - Xsense Connectivity GES-4000 Guide D'utilisation

Copyright
Copyright © 2000 by this company. All rights reserved. No part of this
documentation may be reproduced in any form or by any means or
used to make any directive work (such as translation or transforma-
tion) without permission from Xsense Connectivity, Inc. Xsense
Connectivity, Inc. reserves the right to revise this documentation and
to make changes in content without obligation among Xsense
Connectivity, Inc. to provide notification of such revision or change.

FCC Notice

This equipment has been tested and found to be FCC Rules certi-
fied. These restrictions are designed to provide protection against
harmful interference from residential installations. This equipment
generates radio frequencies that may cause interference with radio
communications if not used in accordance with the instructions.
Interference may even occur during proper installation. If this equip-
ment causes interference, the user is suggested to correct the it by
one or more of the following:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit that is sep-
arate from the one to which the receiver is connected.
4. Consult the dealer or an experienced radio/television techni-
cian for help.
i