Publicité
Les langues disponibles
Les langues disponibles
Pedal exerciser
Assembly Step
1. Assembly Steps
Attach the right and left pedals
(identified by R= right and L=lefl to
the corresponding crank arms
Screw the right pedal clockwise and
screw the lefl pedal anti-clockwise
during inslallalion. Afterwards,
secure the pedals with a wrench.
3. lnstalling/replacing the battery
Remove the display by disconnecting it
from its slot. The battery compartment
is situated behind the counter. Install or
replace a 1.5V AAA battery (NOT PROVI-
DED). Re-assemble the display
www.ubtc.biz
UBTC Switzerland AG – Leuholz 14
8855 Wangen – Switzerland
2. lnstalling the stabilizers
Place the trainer upside down. Mount the front and rear
slabilizers on the bottom of the trainer with screws.
Importer EU: UBTC Germany Gmb H
Rösrather Strasse 740 – 5 1107 Köln – Germany
EN
Art. Nr.: 26227
Publicité
