11)
: Activate teletext
TXT
Press 2 x = set transparent;
Press 3 x = close
12)
Q. MENU: Access the quick menu (OPTION MENU) to quickly call up basic options
13)
: Switching between DVB-S, DVB-T and DVB-C channels / multifunction button for
programme channel or input source
14)
Red button: For teletext or menus
Green button: For teletext or menus
Yellow button: For teletext or menus
Blue button: For teletext or menus
15)
(SIZE): Select picture format
16)
Media buttons
: Fast rewind;
: Fast forward;
: Start recording (PVR);
: Stop playback;
: Start playback;
: Pause playback
17)
LANG.: Analogue TV: stereo/mono ;
Digital TV: select audio language (if available)
18)
SUBT.: Subtitles on/off (if available)
19)
: Open the MEDION® portal /multifunction button for channel position or input source
20)
(MEDIA): Call up the media browser
21)
(EPG): Digital TV: call up the electronic programme guide
EPG
22)
i (INFO): Digital TV: show information (e.g. current channel number)
23)
: Mute
24)
V- / +
: Increase (+) or decrease (−) volume.
Direction button : Move up in menu
25)
Digital TV: Select info bar for the current programme, teletext: select next page;
Direction button : Move down in menu
Digital TV: Select info bar for the current programme, teletext: select previous page;
Direction button : Move left in menu
Teletext: Call up subpages;
Direction button : Move right in menu
Teletext: Call up subpages
26)
BACK: Go one level back in menus
27)
TV
: Switch to TV operation/call up information on channel-specific button
2.3.1. Programming the multifunction buttons
The
and
buttons can be programmed to any channel position or a particular input source
Start by selecting the function you require and then hold down the corresponding button for 5
seconds until
MY BUTTON IS SET
After each
INITIAL INSTALLATION
deleted and reset to the factory defaults
appears on the screen. This confirms the new programming.
your customised button programming is
functions.
and
EN
7