Safety Instructions - INFOSEC S5 ECO TV Sensor Notice D'utilisation

Please read all the instructions before setting up the S5 ECO TV Sensor.
It must be installed indoors in a safe location where the temperature and humidity do not exceed the
limits stipulated in the specifications section.
In addition to this type 3 surge suppressor, the NFC 15-100 standard in France requires the
installation of a type 2 (or 1) modular surge protector at the origin of your electrical system in the
departments where the lightning intensity is greater than 25 (number of thunderstorm days per year).
Please contact the hotline for details.
My TV is on and the sensor detects a presence:
devices are energised.
If there is a problem, do not disassemble the S5 ECO TV Sensor, there are no reparable parts inside.
Setting up your S5 ECO TV Sensor is quick and easy.
 Point your remote at the infra-red sensor.
 Press 1
 After 10 seconds, when the infra-red sensor flashes more slowly: release the button.
 Now, to turn the S5 TV Eco Sensor on or off simply press button 1
It will then become the On/Off control for the S5 Eco TV Sensor.
The motion sensor does not require specific configuration.
Dual sensor function:
-
Infra-red remote sensor: switching the TV S5 Eco Sensor on and off by pressing button 1
1
remote control for 4 to 5 seconds
devices with their usual remote control.
-
Presence sensing device: power to the connected devices will be automatically stopped in the absence
of any movement for more than 20 minutes near the S5 Eco TV Sensor.
2
Green indicator light for power on to "eco" outlets (The S5 ECO TV Sensor is on).
5 "eco" outlets: these sockets are powered automatically when you press button 1
b
seconds while pointing it at the infra-red sensor. Similarly, when you no longer use your equipment, the energy
3
consumption of your audiovisual devices in standby mode is automatically stopped to ensure that you save
energy.
a
: Or any other alphanumeric key on your remote

Safety instructions

Please contact the After-Sales Service (Hotline).
Configuration for first use
a
button on your remote for 10 seconds. The infra-red sensor is flashing.
Legend of the scheme
b
. NB: One quick touch is all it takes to control your Audio/Video
INFOSEC UPS SYSTEM 4, rue de la Rigotière 44700 ORVAULT - France - www.infosec.fr
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 07 12 AA 77 205 03
User Guide
Installation
a
I press 1 button on my remote for 4 - 5
the sensor has not detected any movement for the
past 20 minutes: my equipment automatically switches
off after 5 seconds.
b
seconds or
a
on your remote for 4 to 5 seconds
a
on your TV
a
on your remote for 4 to 5
b
: Some models of remote require you to press twice
b
.
5