Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3) Working rules
Warning! Always follow the safety rules. The power drill must only be used
to drill ground. Do not lock the power drill onto fixed supports. It is forbidden to
apply tools or applications other than the ones indicated by the manufacturer onto
the p.t.o. of the power drill.
4) Installing the wind scooper
For added comfort during warmer conditions you may choose to attach the supplied wind
scooper. The grill is designed to direct the warm air flow away from the user.
Insert one end of the grill as per the arrow indicated(Fig.4)
Hold down the inserted end and push down the opposite end until the grill clicks
in position.(Fig.5)
Fig.4
OPERATION
1)Fuel mixture
Only fuel the machine in well-lit areas. Avoid fuel spillage. Never refuel the machine during operation. Let
the engine cool down for about two minutes before refueling.
Refueling must not be carried out near naked flames, control lamps or spark producing electrical
equipment such as electric tools, welders or sanders.
1.
Make sure the machine is turned off, by turn the engine switch to the "off" position.
2.
Check the fuel by a visual check , remove the fuel cap and reviewing the fuel level.
3.
Full unleaded fuel mixed with oil from an approved fuel container into the fuel tank, because of fuel
expands, please fill the tank to the neck of tank only.
4.
Turn the fuel cap clockwise to assembly it in position.
WARNING.
●
Do not refill fuel while engine is running or hot.
●
Make sure fuel is not leaking.
Use quality two-stroke oil and make a mixture of 40 parts petrol to one part oil only (2,5% oil mixed in
fuel).
Never use two-stroke oil intended for water-cooled engines.
Never use oil intended for four-stroke engines.
A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of
catalytic converters.
21
Fig.5
Publicité
Table des Matières
