Led Indicators; Functions; Configuration - ESPA evopool SilenPlus Manuel D'instructions

10. LED INDICATORS

The possible LED combinations and their meanings are: The possible LED combinations and their meanings are:
0 = LED OFF
1 = LED ON
2 = LED flashing slowly
3 = LED flashing quickly
MAN/ BACKWASH
FAULT
Plus Plus
Plus Plus
0 0
0 1
0 1
1 0
1 1
1 1
2 0
3 3
( .. .t og e th er ...)
3 0
3 1
3 1
2 1
2 1
FILTRATION
Equipment status
Plus Plus
Plus Plus
1 Filtration Plus function in Remote mode.
0 Backwash Plus function in Remote mode.
1 Mixed Cycle function in Remote mode. Motor at 100%.
1
Filtration Plus function in Manual mode.
0 Backwash Plus function in Manual mode.
1 Mixed Cycle function in Manual mode.
"Standby" mode. The equipment has power, motor stopped. "Standby" mode. The equipment has power, motor stopped.
a) Valve in intermediate positions or position 6 in Remote mode.
0
b) Stop function in Manual mode.
c) Timer OFF position.

Configuration

3
Initial configuration: standing by for link with ControlSystem
1 Filtration Plus speed setting.
0 Backwash Plus speed setting.
1 Mixed Cycle speed setting.
2 No water error. Start-up retry attempted.
1 No water error. Full shut-down.

Functions

ode. Motor at 100%.
Errors
12
or position 6 in Remote mode.
ontrolSystem
EN