Using The Air Compressor; Led Light - Wagan Tech Hi Speed Air Compressor Guide D'utilisation

Using the Air Compressor

1. Attach the air nozzle to the tire valve and tighten it clockwise.
2. Turn on the car engine.
3. Plug the 12V DC adapter into the cigarette lighter socket.
4. Press the Power Switch to ON to start the air compressor. Carefully
observe the air pressure using the Pressure Gauge and press the Power
Switch to OFF once the desired PSI level is reached.
5. Twist the air nozzle off the tire valve counter-clockwise and remove the
12V Adapter out from the cigarette lighter socket.
6. Turn off the car engine.
7. Wrap the wire and air hose and tuck them into their locking slots.
Attach Nozzle
to tire valve.

4-LED Light

The Hi Speed Air Compressor features a 4-LED light in the front to help while
working at night. Simply press the Light button just above the light to turn it on.
Press it again to turn off. It requires the 12V DC adapter to be plugged in and
powered.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
Plug DC Adapter
into power socket.
©2012 Wagan Corporation. All Rights Reserved.
Turn on compressor,
check pressure gauge.
4