Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
UDR116
DESCRIPTION RECEIVER
Front panel :
1)
On/Off switch
To switch the receiver on or off.
2)
Level control
This control is used to adjust level output signal
3)
Menu buttons
These three buttons are used to select different menu receiver ( frequency group, frequency, IR sync.... )
4)
LCD display
One LCD display by channel. Shows frequency, AF and RF level, group of frequency,....
5)
IR sensor
This sensor is used to operate the IR frequency sync with transmitters. Don't cover this sensor
Rear panel :
6)
Power connector
Plug on this socket the power adapter delivered with the set ( 12-18V / 500-600mA AC/DC ).
7)
Antenna
8)
Balanced output
This balanced output is the sound output. connect it to mic input of the mixer
9)
Unbalanced output
This unbalanced output is the mix of the two ouput ( channel A and channel B ). connect it to mic input of the mixer
© Copyright LOTRONIC 2015 UDR116
WWW.BSTDJ.COM
Page 8
Publicité
Table des Matières
