BST UDR116 Manuel D'utilisation page 10

UDR116
DESCRIPTION RECEIVER LCD DISPLAY
1) AF / FR Indicator
Show you the level of RF and AF levels (RF is the wireless signal and the audio signal AF)
2) Channel number
Show you the selected channel number ( from 00 to 100 )
3) Fréquency
Show you the used frequency
4) IR indicator
This indicator lights on when the IR frequency sync is ready
5) Mute indicator
This indicator lights on when the wireless audio signal is not receive by the receiver in this case, check the used frequency and
batteries and do the IR frequency sync
6) Diversity indicator
These two indicators ( A and B ) show you which antenna receive the wireless signal for transmitters
IR FREQUENCY SYNC OPERATING
- Press the SET/SYNC button on receiver to start the IR frequency set
- The LCD display will show the indicator )))), that mean the IR frequency signal is running
- Take the transmitter you want to adjust. Place the IR sensor of receiver near the IR sensor of the transmitter ( distance max = 3
cm )
- If you want to selecting an other frequency, do it before to start the IR frequency sync. Do it with Up and Down buttons of the
selected receiver
-
SPECIFICATIONS
Receiver:
Frequency band :
Power supply :
Signal / noise ratio :
Sensitivity :
Operating range :
Frequency response :
AF output inpedance :
Output level :
Dimensions :
Weight :
Handheld transmitter :
RF power :
Display :
Power suplpy :
Batteries lifetime :
Body :
Belt transmitter ( not available in this set ) :
RF power :
Display :
Power suplpy :
Batteries lifetime :
© Copyright LOTRONIC 2015 UDR116
UHF ( norm CE & FR )
AC/DC 15-18V / 500m-600A
>105dB
-105dB
120m max
40Hz – 18KHz
2.2KOhms
Balance 0-400mV ; Unbalance 0-200mV
205x43x170mm
1Kg
30mW
LCD
2 batteries of 1,5V
8 hours
Metal
30mW
LCD
2 batteries of 1,5V
8 hours
WWW.BSTDJ.COM
Page 10