RZ_FM 30_1018.qxp_Text_GB 25.10.18 09:55 Seite 22
8
Problems with the device
Fault
Device is leaking at the
screw connection
Spray pattern of
nozzle not OK
Pump does not build
up any pressure
9
Disposal & Legislation
9.1 Environmental protection & disposal of the device >>
arated according to the different materials and disposed of at a recycling collection point. The
materials can be recycled according to their designations.
Please check with your local government to find the appropriate disposal point.
Empty the device before disposal and render it unusable.
9.2 Disposal of packaging >>
environment ally- suitable and disposal-related aspects and are therefore recyclable.
Returning the packaging to the material circulation saves raw materials and reduces the level of
waste. Please dispose of unwanted pack aging materials according to applicable local regulations.
10
EU Declaration of Conformity
EU Declaration of Conformity for a module as defined by Article 4,
section 3 of the Directive on pressure equipment 2014/68/EU
GLORIA Haus- und Gartengeräte GmbH
Därmannsbusch 7
D-58456 Witten
confirms that the pressurised components of the foam spraying device FM 30 comply with
Directive 2014/68/EU, article 4, paragraph 3.
Witten, 30/08/2018
Ludger Strunk
(Head of Development and Design)
Cause
Hose loose
Nozzle partially blocked
Filter in quick closure valve
contaminated
O-ring on piston is
worn
The packaging materials have been selected according to
22
Remedy
Tighten coupling nut
and carry out pressure
test with water
Clean filter or nozzle
Replace O-ring
The device must be sep-