senya EASY TEA SYBF-K001 Notice D'utilisation page 30

II.2 PACKAGE CONTENTS

A programmable kettle

A charging base

An instruction manual
II.3 TECHNICAL CARACTERISTICS OF THE PRODUCT

Programmable kettle in stainless steel

360° rotating base

1.7L capacity

Removable filter

LED screen

Temperature selection: from 40° to 100°C

5°C increments

Water level indicator at back of kettle

60 min. keep hot function

Cable length: 75 cm

Product dimensions: 22.9 x 15.9 x 23.1 cm

Power 1,850-2,200 W, 220-240V, 50/60Hz
III- USE OF PRODUT
III.1 BEFORE USING FOR THE FIRST TIME
1. Remove the appliance and various components from the packaging and ensure that these are
in good working order and show no visible damage. Do not use a damaged appliance.
2. Fill the kettle with cold water up to the maximum level indicated (1.7L).
3. Boil the water twice without any additives.
4. After doing this, you can start to use the appliance.
III.2 OPERATION OF THE PRODUCT
III.2.1 Temperature selection
1. Open the lid in order to fill the kettle.
2. Fill the kettle with cold water only and respecting the water level indicator (MIN-MAX).
Note: If the kettle is overfilled, boiling water may be ejected.
3. Close the lid by pressing it lightly until it locks (click).
Place the kettle on the Rotating base(4).
4.
The LED screen(5) light up blue, the Keep hot button(6) and the On / Off button(9) lights up
5.
at the same time, and then the Keep hot button(6) light turns off. The LED screen(5) shows
the current temperature of the water. If you do not perform any operation, it enters the
29