Settings Menu Content; Backlight - Nordmende Wegavision UHD 43B Mode D'emploi

Settings Menu Content

Picture Menu Content
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving

Backlight

Picture Zoom
Picture Shift
Advanced Settings
Dynamic
Contrast
Colour Temp
White Point
Blue Stretch
Micro Dimming
Noise Reduction
Film Mode
MEMC
MEMC Demo
Skin Tone
Colour Shift
You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.
Note: Available options may differ depending on the input source.
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and
Dolby Vision Bright picture mode options will be available instead of Cinema and
Natural modes.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Screen Off or Off.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. This option (will be located under the Energy
Saving setting) will be avai̇ lable if the Energy Saving is set to Custom. Highlight and
use Left/Right directional buttons to set.
Sets the desired image size format.
This option (will be located under the Picture Zoom setting) may be available depending
on the Picture Zoom setting. Highlight and press OK, then use directional buttons to
shift the picture upwards or downwards.
You can change the dynamic contrast ratio to desired value.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
If the Colour Temp option is set as Custom, this setting will be available (will be located
under the Colour Temp setting). Increase the 'warmth' or 'coolness' of the picture by
pressing Left or Right buttons.
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
Low, Medium, High and Off options are available. While Micro Dimming is active, it
will enhance contrast locally for each defined zone.
Low, Medium, High and Off options are available. If the signal is weak and the picture
is noisy, use the Noise Reduction setting to reduce the amount of noise.
Films are recorded at a different number of frames per second to normal television
programmes. Turn this feature to Auto when you are watching films to see the fast
motion scenes clearly.
Press left/right buttons to set
active, it will optimise the TV's video settings for motional images to acquire a better
quality and readability.
MEMC
When option is set to Low, Medium or High, this option will be available. Press
OK button to activate the demo mode. While demo mode is active, the screen will be
divided into two sections, one displaying the
normal settings for TV screen. Press OK button again to cancel.
Skin tone can be changed between -5 and 5.
Adjust the desired colour tone.
English - 18 -
MEMC
to Low, Medium, High or Off. While
MEMC
MEMC
activity, the other displaying the
is