Connecting The Appliance To The Mains Power Supply - Wortmann Terra RS 232 Manuel De L'utilisateur

!
56
Connecting the appliance to the main power
supply
• Connect the mains cable to the
appliance.
• Plug the mains plug into the grounded
socket.
Initial activation:
If the device is integrated into a network,
the software installation needs informa-
tion about the user, server and network
protocol. If you have questions about these
details, please contact your network admi-
nistrator.
• When you turn on the device for the
first time, the supplied software will be
installed and configured.
• Please schedule some time for this
action, because this process must not
be interrupted
• After starting the installation the device
may not be turned off until it is
completed.
• During the installation, the device may
only be restarted by request.
• Otherwise the installation will not be
correct accomplished and the hard
drive contents must be completely
restored.
• It is possible that you need the license
number for windows during the
installation. The number can be found
on the lable on your device.