Scope Of Delivery; Parts Overview; Setting Up Power Supply; Cleaning And Maintenance - Bresser 9624101 Mode D'emploi

7 Scope of delivery

LED sewing magnifier (A), 2 pcs. of LR 1142 type coin cell
(pre-installed to the magnifier's head), instruction manual

8 Parts overview

1 Large lens (magnification:
2X)
3 Toggle screw (lens frame) 4 On/Off switch for the light-
5 LED lighting
7 Toggle screw (magnifier
stand)
Table 1: All parts of the sewing magnifier

9 Setting up power supply

1.
2.
3.
4.
5.

10 Cleaning and maintenance

• Switch off the device to perform maintenance tasks or
22 / 72
Loosen and remove the fixing screw using a Phillips
screwdriver.
Remove the battery compartment cover.
Insert batteries into the battery compartment. Ensure
that the battery poles (+/-) are correctly aligned.
Reattach the battery compartment cover.
Insert and tighten the fixing screw by hand using the
Phillips screwdriver.
when the device is not in use.
2 Small lens (magnification:
4X)
ing
6 Toggle screw (magnifier
joint)
8 Magnifier stand