König Electronic CMP-HOMEPL200 Mode D'emploi page 3

LED Details
Power LED Solid green – Powered on
Off – Power off
Blinking green – Security setting up
Solid green – Security setup successful
Double flash - Fail in security
Homeplug link On/Green - The power line network is active and linking to other adapter(s) at high speed
LED PHY rate
On/Red – Power line network is active and linking to other adapter(s) at low speed PHY rate
Off – Power line network is not available – no other homeplug devices were detected
Ethernet link Solid green – 10/100/1000 Mbps port linked
LED
Flashing – Data transmitting or receiving
Off – No Ethernet link
Bottom casing details
The bottom casing contains a recessed Reset Button, a Security Button, and 1 Ethernet Port.
Security This button is designed to generate an individual network group under multiple nodes
environment
Reset Please refer to Security Button section for more details.
This button is used to clear ALL data and restore ALL settings to the factory default values.
Press and release the reset button to begin restore factory default.
System requirements
- One or more other homeplug(s) of CMP-HOMEPL200/201/1000/1001 and compatible devices
- Available Ethernet port on the computer or network device
- Available power outlet. Please avoid using homeplug devices on power strips as they can affect
product performance
- Standard home power line wiring
Package contents
- 1 Homeplug Ethernet bridge
- User manual CD
- Limited warranty card
- 2 RJ45 Ethernet cables
3