Speedlink SL-8793 Mode D'emploi page 16

Connect the headset's coloured jack plugs to the corresponding outputs on
your soundcard (green jack plug to green connector etc.). The cables use
the following colour coding:
GB
Green
Black
Orange
Pink
Connect the headset's USB connector to any free USB port on your PC.
Note: the USB connector only supplies power to the headset. If the USB port
does not supply enough power then you can plug the USB connector into the
mains adapter and power the headset from the mains.
You can use the test program supplied with your soundcard to test the
headset.
If necessary, adjust the volume using the volume control on the in-line
remote.
Connecting to a stereo soundcard
Connect the headset's green jack plug to the speaker output on your sound
card.
Connect the headset's pink jack plug to the microphone input on your sound
card.
Connect the headset's USB connector to any free USB port on your PC.
Note: the USB connector only supplies power to the headset. If the USB port
does not supply enough power then you can plug the USB connector into the
mains adapter and power the headset from the mains.
Front speaker
Rear speaker
Subwoofer und Centre speaker
Microphone
16