Safety Information - Matrix HG 2000/4 Traduction De La Notice Originale

Safety Information

The equipment complies with the safety
regulations required for electrical
equipment.
Read through the instructions for use before
starting up the equipment.
Improper use can lead to personal injury and
property damage. Persons, who are not familiar
with the instructions, may not operate the
equipment.
Keep the instructions for use in safe custody.
Children and youths are not permitted to operate
the equipment.
Use According to Specifications
This heat gun is suitable for thawing, disinfecting,
removing paint, gluing, soldering, melting,
shrinking, welding, drying, and shaping in the
private sector.
The heat gun is certified for connection to a 230
volt 50 Hz (10 / 16 A) AC voltage earthing contact
receptacle.
Its use is limited to closed, dry rooms. Contact
with moisture must be avoided at all costs.
The manufacture assumes no liability whatsoever
for improper use or if the machine has been
tampered with.
Give equal attention to the safety instructions,
assembly and operating instructions as well as
prevailing accident preventions regulations.
Safety Information
In the event of damage caused by not observing
this operating guide, any guarantee claim
becomes void.
No liability is assumed for consequential damage!
6
We don't assume any liability for personal injury
or property damage from improper handling
or not observing the safety instructions. In such
cases, any guarantee claim becomes void.
Danger of being burned!
The exhaust pipe and nozzles become
very hot when in use.
Always let all tools cool before putting them back
in the carrying case.
Always wear gloves and safety glasses when
working with the heat gun.
Please observe that when working with plastics
and paints, poisonous and/or explosive vapours
can form, which must not be inhaled.
Make sure that there is adequate ventilation at
the workplace.
Hot air can cause chemical reactions with various
materials.
The affect of heat causes an increased danger of
fire and explosion.
Don't work close to flammable liquids or gasses.
Never use the device for drying hair.
Never aim the airflow at persons or animals.
Make sure that the ventilation slots and exhaust
opening aren't covered or plugged.
Never touch the hot air nozzle. The
exhaust pipe and nozzles become very
hot when in use. Danger of being
burned!
Never aim the device at one and the same
location for too long.
Pay attention to flammable materials when using
the device.
Attention: Heat can be conducted to concealed