Service And Maintenance - Festool MX 1600/2 EQ DUO Notice D'utilisation D'origine

upward and the upper paddles force the material
downward.
Paddle Stirrers HS 3 Double (accessory)
For mixing of heavy materials with high viscosity.
Two stirrers, each with three spirals, work against
each other. The material is mixed with a comb-
like mixing action.
Move the machine up and down while stirring.
Clean the stirrer after use.
7

Service and maintenance

WARNING
Risk of accident, electric shock
 Always pull the plug out of the socket before
performing any type of work on the machine.
 All maintenance and repair work which re-
quires the motor housing to be opened, must
only be carried out by an authorised service
workshop.
Customer service and repair. Only through
manufacturer or service workshops:
Please fi nd the nearest address at: www.
festool.com/Service
Use only original Festool spare parts! Or-
EKAT
4
der No. at: www.festool.com/Service
5
3
2
1
- After approx. 200 hours of operation, renew the
grease fi lling in the gearbox.
To verify that the double insulation is in-
tact, the machine must be subjected to a
safety test afterwards. Therefore, these
maintenance tasks are to be performed
only by a professional electroworkshop.
- Periodically clean the venting slots on the mo-
tor housing.
- The machine automatically switches off if the
carbon brushes are worn. The machine must
be sent to the workshop for maintenance work.
- We recommend that you clean the machine
regularly. Remove any dust, residual mixing
material and any other dirt. If you use solvent-
based cleaning agents, these may damage the
painted surfaces or the plastic parts. If you use
these cleaning agents, we recommend that you
test the effect of these agents on a small, con-
cealed area. The ventilation holes on the motor
hood must not be blocked.
- Commission an authorised workshop to
change brushes, the power cable etc.. If the
machine is knocked in any way, it is also nec-
essary to entrust an authorised workshop in
order to prevent any mechanical or electrical
danger arising.
- The packaged machine can be stored in a dry
place without heating as long as the inside
temperature does not fall below −5 °C. The
unpackaged machine must only be stored in
a dry, enclosed space where the temperature
does not fall below +5 °C and where no extreme
temperature fl uctuations occur.
10 Environment
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible re-
cycling centre! Observe the valid national regula-
tions.
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh:
www.festool.com/reach
11 EU Declaration of Conformity
Stirrer
MX 1600/2 EQ DUO
Year of CE mark: 2013
We declare under sole responsibility that this
product complies with the following norms or
normative documents:
2006/42/EG, 2004/108/EG (until 19.04.2016),
2014/30/EU (from 20.04.2016), 2011/65/EU,
EN 60745-1:2009, EN 55014-1:2006+ A1:2009+
A2:2011, EN 55014-2:1997+ Corrigendum 1997+
A1:2001+A2:2008, EN 61000-3-2:2006+ A1:2009+
A2:2009, EN 61000-3-3:2013.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
2015-03-02
10
Serial no.
769238