CTC Clatronic TA 2745 Mode D'emploi page 25

5....-05-TA 2745 Beach NEU
1. Only connect the unit to a properly installed and earthed power socket
(230 volts, 50 Hz).
2. To set the browning level, turn the selector clockwise to the preferred level star-
ting from the lightest - level 1 - to the darkest - level 7. If you are not sure start
with a lower setting.
3. Insert the slices of bread in the toasting slot and lower the slide with the lever
until it snaps into place.
4. The appliance starts the toasting. When the set level of browning is reached,
the appliance switches off automatically. The slide pops up automatically.
5. The appliance has a heat-insulated „cool-touch" housing. The metal parts beco-
me hot during use. Leave the toaster to cool before putting it away.
To use the desired special function, press the relevant key, after pressing down the
lever:
Heating or thawing:
Thawing (
Warming (
STOP (
Integrated
Toasting Attachment:
• Pull the mains plug out of the mains socket before you clean the unit and allow
the unit to cool down.
• Only use a slightly damp cloth to clean the outside of the unit.
• Do not use abrasive or aggressive cleaners.
• Remove the crumb tray from the slot, remove the crumbs and insert the tray
again.
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
14.04.2003 12:57 Uhr
Operation
the relevant LED indicates the function.
): to thaw and toast deep-frozen bread.
): to warm bread already toasted.
): to stop toasting in advance.
for the toasting of bread rolls. Push the button on the
top of the housing fully to the right in order to fold the
browning attachment out.
Cleaning
Seite 25
GB
25