Pairing And Connecting; Reconnecting To The Amplifier - Marmitek BOOMBOOM 430 Guide Utilisateur

PAIRING AND CONNECTING

The Bluetooth amplifier must be paired with your Bluetooth-
enabled device in order to be able to stream audio. To pair the
amplifier, power up the amplifier. Then go to the wireless
settings of your Bluetooth device and select "Scan for
Bluetooth devices". If in Windows, select "Add New Device" in
the Bluetooth tab.
Once the amplifier is shown as a headset with the name
"BoomBoom 430", confirm the pairing on your device. Next
your Bluetooth device will automatically connect to the
amplifier. If it doesn't, manually select "Connect". If streaming
from Windows, note that Windows will install drivers during the
pairing. Manually connect to the amplifier by right-clicking the
headset symbol and selecting "Connect" if Windows does not
connect automatically.
After the pairing is complete, the status LED will be on and
audio can be streamed to the amplifier from your device.

RECONNECTING TO THE AMPLIFIER

If the amplifier or your device is switched off, the connection
will be dropped. When the amplifier is switched back on, you
can manually reconnect to the amplifier by revisiting the
Bluetooth settings of your device. Then simply select the
amplifier and select "Connect". The audio streaming will
resume. In Windows, right-click the headset symbol and select
"Connect".
BOOMBOOM 430 9