Sunforce 200 Watt Notice D'utilisation page 2

200 Watt Power Inverter
12V-DC to 110V-AC
200 Watt Continuous
400 Watt High Surge
Owner's Manual
Thank You for Purchasing 200Watt Power Inverter
For the most beneficial, efficient operation, and long term use from your new inverter, please read carefully the
information and explanation of features contained in this manual. You are also advised to keep this manual in a safe
place for ready reference.
Introducing the 200W Inverter
These inverters lead the field in power inverters and set the pace in development and design. They have been
meticulously assembled to provide reliable service, converting low voltage, direct current (DC) to 110 volt alternating
household current (AC).
CAUTION: WORKING WITH BATTERIES
To reduce the risk of battery explosion, follow all instructions of the battery manufacturer and all manufacturer
instructions of additional components.
RISK OF EXPLOSIVE GAS – Working in the vicinity of a lead acid battery is dangerous. Lead acid batteries
contain hydrogen-oxygen gases that can cause explosion and sulfuric acid that can cause severe burns.
Always work in a well ventilated area.
DO NOT SMOKE, OR ALLOW A SPARK OR A FLAME IN THE VICINITY OF A BATTERY!
Remove personal metal items such as rings, necklaces, watches, and bracelets when working with a battery.
Be extra cautious to reduce risk of dropping a metal tool on to the battery. The battery may spark or short
circuit.
NEVER CHARGE A FROZEN BATTERY
If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters the eye,
IMMEDIATELY FLOOD EYE WITH RUNNING COLD WATER for at least 10 minutes. GET MEDICAL
ATTENTION IMMEDIATELY.
Failure to comply with above warnings may lead to explosion, and or severe injury.
Working with Inverters
• For most effective use place the power inverter on a flat surface.
• Keep the inverter dry.
• Do not expose the inverter to moisture, including rain, snow, spray mist, or excessive
humidity.
• To reduce risk of fire hazard, do not cover or obstruct the ventilation openings. Do not install
the inverter in a non ventilated space. Overheating may result.
• Do not place the inverter near heating vents, radiators or other sources of heat.
• Do not place the inverter in direct sunlight, ideal temperature is 50°F – 80°F (10°C – 26°C).
• Use appropriates cables and attachments. To avoid a risk of fire and electric shock, make
sure that existing wiring is in good electrical condition; and that wire size is not undersized.
Do not use damaged or low grade wires. To ensure adherence to proper electrical wiring
regulations all wiring must be done by a certified technician or electrician.
• Do not use inverter if it has been dropped or damaged.
• Keep the inverter away from flammable materials.
Do not attempt to repair or disassemble the inverter. Risk of shock and fire. Any alterations
•
to the inverter will render the warranty void.
• Disconnect the inverter from all connections before performing any maintenance on any of the
equipment, such as changing a fuse on the inverter.
• This is not a toy-keep away from children.