Running-In Period; Care And Cleaning - Scandyna PodSpeakers MicroPod Sub Guide De L'utilisateur

ENGLISH /

Running-in period

We recommend a running-in period of your new MicroPod Sub of approximately 15-20 hours at normal
listening level before you decide on the final positioning and settings of the subwoofer.
During the running-in period, the drive unit will settle in and perform as intended.
ENGLISH /

Care and cleaning

We strongly advise against the use of any solvents or cleaners on the lacquered cabinet.
The cabinet surface usually only requires dusting or cleaning with a damp soft cloth (only use cold clean
water). Do not remove the round front metal grille – this must be performed by qualified repair personnel.
ENGLISH /
Troubleshooting
Basic troubleshooting
If the LED (8) indicator does not light up then check;
• that the power cord (1) is firmly plugged into the socket and mains wall outlet
• that the POWER switch (2) on the rear panel is ON
• the fuse, if fuse (3) need to be replaced only use the same type and value
If no sound then check;
• that the MicroPod Sub is turned ON and indicator LED (8) lamp glows green
• that the VOLUME control (7) on the rear panel is not all the way down
• that the input cable (3) is firmly plugged in both MicroPod Sub and amplifier
• that MicroPod Sub gets a signal from the amplifier (there is a check tone on most AV-receivers)
// 10