Cleaning And Maintenance - ISOFIX POLAR FIX 01 Notice D'instruction

6.3 fastening the child into the car seat
the correct adjustment of the headrest ensures that
the child is properly fastened into the car seat. the
headrest must be adjusted so that the harness
(which moves with the headrest) is at shoulder
height on the child or slightly above, but never behind
the back or at ear level (fig. 1).
(d)
1. pull the headrest height adjuster and move it to
shoulder height in accordance with the size of the
child (fig. 2).
2. loosen the harness straps by stretching the chest
section while holding down the harness adjustment
button (g) (fig. 3).
3. open the buckle (f) so that the child can be placed
into the seat. the harness straps can be placed on
the armrest (fig. 4)
4. place the child into the seat.
5. Fit the safety harness around the child, using the
buckle (f) to fasten the two parts together until
you hear a "click" (fig. 5).
(e)
6. stretch the harness adjustment belt in order
to give the harness the correct amount of tension.
remember that in order to guarantee the child's
safety, harnesses must be well-tightened (fig. 6).
26
fig. 1 fig. 2
fig. 3 fig. 4
fig. 5
cLIcK
fig. 6
7. RecLIne POsItIOns
1. in order to make the child as comfortable as possible,
the seat can be reclined by pulling the lever (I)
the front part of the seat. Keep the lever pressed
down as you recline the seat, releasing it when the
seat is in the desired position (fig. 1 and 2).

8. cLeAnIng And MAIntenAnce

1. to wash belts and plastic parts, use neutral detergent
and warm water.
2. Ensure that soap does not enter inside the buckle or
metal pieces.
3. Do not use chemical products or bleach on any part
of the child seat.
9. guARAntee
In accordance with Law 23/2003 of 10 July on the sale of
consumer goods and associated guarantees, babyauto
guarantees its products against any manufacturer defect for a
period of 2 years, starting from the day of purchase.
1. the warranty does not cover defects or failures caused by
inappropriate use or non-compliance with the installation
and maintenance safety standards described in the
instruction guides provided with the products.
2. total repair of original defects is guaranteed free of charge.
fig. 1 fig. 2
under
WAshIng InstRuctIOns:
- the cover can be removed and washed - dry clean, any solvent
at 30 °c. It should only be air-dried. except trichlorethylene.
- Machine wash, cold. - do not use a dryer.
- do not use bleach. - do not iron.
30 °C
3. If repairs carried out are not satisfactory and the product
does not meet the optimal conditions for fulfilling its
intended use, the holder of the warranty shall have the
right to substitute the acquired article with another one
of similar characteristics, or have the price paid returned, in
the 2 years following the date of purchase.
4. the warranty shall be automatically considered void if
the article acquired has been repaired or if an attempt
has been made to repair it by an individual that is not
authorised by our company.
27