DS Produkte Z 04580 Mode D'emploi page 15

Risk of electric shock and fi re
Only use the device in enclosed areas.
■
Always place the device on a dry, level and solid base.
■
Keep a suffi cient distance from other heat sources, e.g. hobs or
■
ovens.
Never cover the device with cloths or the like. Danger of over-
■
heating!
The device should never be set up when highly fl ammable ma-
■
terials are nearby (curtains, textiles, etc.).
Do not place any fl ammable materials such as paper, cardboard
■
or plastic in or on the device.
Never submerge the motor unit in water or other liquids! Make
■
sure that the motor unit, the cord or the plug can not fall in water
or get wet.
If the motor unit falls in water, immediately disconnect the power
■
supply.
Never touch the motor unit, the cord or the plug with wet hands.
■
Only connect the device to a socket, which has been proper-
■
ly installed and complies with the device's technical data (see
chapter "Technical data").
Lay the cord such that it is not crushed or creased and such that
■
it does not come into contact with hot surfaces.
Pull the mains plug out of the socket if you do not use the de-
■
vice, before you clean the motor unit, if a defect occurs while in
use or before a storm.
If you want to remove the mains plug from the socket, never pull
■
on the cable, but always on the plug.
The device is not intended to be operated with an external timer
■
or a separate telecontrol system.
Beware of damage to the device and property
Check the device for damages prior to each use. The device
■
must not be used if the motor unit, the accessories, the mains
cord or plug exhibit visible damages. Do not attempt to repair
the device or replace the cable and/or plug yourself. Only have
04580_de-en-fr-nl_A5_V1.indb 15 04580_de-en-fr-nl_A5_V1.indb 15
15 EN
30.03.2016 10:36:28 30.03.2016 10:36:28