Checking The Hair Dryer And Package Contents; Operation; Switching On/Off And Adjusting Fan/Heat; Cooling Function - Silk-n SilkyLocks 2200W Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
parts exhibit cracks or breaks or are
EN
deformed. Only replace damaged parts with
corresponding original spare parts.
5. Checking the hair dryer and package
contents
NOTICE! RISK OF DAMAGE!
• If you are not cautious when opening the
packaging with a sharp knife or other pointed
object, you may quickly damage the hair dryer.
Be very careful when opening it.
1. Take the hair dryer out of the packaging.
2. Check to make sure that the delivery is complete (see Fig. A).
3. Check whether the hair dryer or individual parts are damaged.
If this is the case, do not use the hair dryer. Contact our
customer service.

6. Operation

• Clean all parts of the hair dryer before first use as
described in the chapter "Cleaning".
• Before using the hair dryer for the first time, switch
it on for a few minutes and set it to the highest
speed/temperature. As a result of the manufacturing
process, you may notice a slight odour. This is normal
and only occurs during first use. Ensure that the room
is well ventilated.
13

6.1 Switching on/off and adjusting fan/heat

1. Connect the mains plug
3
2. Press the power button
4
3. Slide your finger on the smart touch display
fan/heat for the airflow. The hair dryer features six fan settings
and eight heat settings. Slide upwards on the display for a
higher fan/heat setting; slide downwards for a lower fan/heat
setting.
4. After the fan/heat level is selected, press the lock button
to prevent unintended setting changes.
5. Dry your hair by making brushing movements with the
hair dryer at a small distance from the hair. Switch off and
unplug the hair dryer after drying.

6.2 Cooling function

For long-lasting styling results, you can press and hold the cool
shot button
7
to get a cool air flow during operation. When
you no longer need the cool airflow, release the button.

6.3 Attaching the accessories

8
Snap the concentrator
or the diffuser
dryer. Detach it by pulling it off after it has cooled down.
The concentrator enables you to direct the airflow onto specific
sections of hair for styling with a brush or comb.
The diffuser emits a gentle airflow to create curls and natural waves
in the lengths and tips, as well as add volume at the roots.
with an easily accessible socket.
to switch on the hair dryer.
5
to adjust the
6
9
onto the hair
EN
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rcy-190iHd1peu002

Table des Matières