Lubrication; Two-Year Warranty - Genesis GPS080 Manuel D'utilisation

CaUTIOn
: To avoid damaging the motor from overheating, be careful not to
let your hand cover the air vents.
For detail sanding such as corners and crevices, use the tip of the sanding pad with
small back and forth motions.
MaInTEnanCE
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. use clean cloths to remove
dirt, dust, oil, grease, etc.
WarnIng:
based products, penetrating oils, etc., come in contact with plastic parts.
Chemicals can damage, weaken or destroy plastic which may result in serious
personal injury.
electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject
to accelerated wear and possible premature failure because the fiberglass chips and grindings are
highly abrasive to bearings, brushes, commutators, etc. Consequently, we do not recommended using
this tool for extended work on these types of materials. However, if you do work with any of these
materials, it is extremely important to clean the tool using compressed air.

LUBRICATION

This tool is permanently lubricated at the factory and requires no additional lubrication.

TWO-YEar WarranTY

This product is warranted free from defects in material and workmanship for 2 years after date
of purchase. This limited warranty does not cover normal wear and tear or damage from neglect
or accident. The original purchaser is covered by this warranty and it is not transferable. Prior to
returning your tool to store location of purchase, please call Toll-Free Help Line for possible solutions.
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
TOLL-FrEE HELP LInE
For questions about this or any other GeNeSIS Product, please call Toll-Free:
www.richpowerinc.com
Or visit our website:
Do not at any time let brake fluids, gasoline, petroleum-
888-552-8665
.
11