Tooland WR25207 Mode D'emploi page 4

5. Operation
5.1 Installing the Batteries
 Locate the battery compartment at the back of the set.
 Unscrew the battery compartment cover using an appropriate screwdriver.
 Insert four R14/C-size batteries into the battery compartment in accordance with the polarity.
 Close the battery cover and retighten the screws.
5.2 Powering the Unit with an AC Adaptor
 Connect the included power adaptor to the DC inlet of the set.
 Plug the power adaptor into the mains.
5.3 Operating your Radio Set
 Switch on your radio by pressing the power button.
 Press the tune+ or tune– button to select the desired station frequency.
 Adjust the volume level using the volume – or volume+ button.
 Press the power button to switch off the radio.
5.4 Manual Station Presetting
 Select your radio station frequency.
 Press the /MEM/TIME button. [MEM XX] will blink on the LCD display.
 Press the PR–/| or PR+/
 Press the /MEM/TIME button to store the frequency.
 Repeat the same process and store all desired radio stations.
 Once stored, select your station with the PR–/|
5.5 Automatic Station Presetting
 Press and hold the
 The radio set will automatically search and memorize 20 station frequencies.
5.6 Clock Setting
 In stand-by mode, hold the
 Set the hour with the tune+ or tune– button.
 Press the /MEM/TIME button to select the minutes.
 Set the minutes with the tune+ or tune– button.
 Press the /MEM/TIME button to confirm.
5.7 Alarm Setting
 In stand-by mode, press the AL.On/Off button and select the [AL1], the [AL2] or the [AL off] mode.
 Hold the ||/AL.SET button pressed. The hour digit blinks.
 Set the hour with the tune+ or tune– button.
 Press the ||/AL.SET button to select the minutes.
 Set the minutes with the tune+ or tune– button.
 Press the ||/AL.SET button to confirm.
 Proceed to set alarm 2.
5.8 Snooze Function
 When the alarm goes off, press the snooze/sleep button to put the alarm in stand-by for 9 minutes.
5.9 Deactivating the Alarm
 When the alarm goes off, press the power button to deactivate the alarm. Note that the alarm will go off at
the same time the next day.
 To completely deactivate the alarm, press the AL.On/Off button repeatedly until the [AL1] and/or [AL2] icon
disappear form the display.
V. 03 – 26/08/2016
| button to select your preset number.
||/AL.SET button.
/MEM/TIME button pressed. The hour digit blinks.
WR25207
or PR+/ | button.
4 ©Velleman nv