Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GETTING TO KNOW YOUR FOOD PROCESSOR
1. Main Unit
2. On/Off Speed Control Dial
3. Pulse/Turbo Button
4. Storage Compartment
5. Processor Bowl
6. Double Chopping Blade
7. Processor Cover
8. Food Pusher
9. Spindle
Illustrations may differ from actual product.
Technical Specifications
Voltage:
120V., 60Hz.
Power:
800 Watts
Capacity:
6 Cups (1.5 Liters)
Double Blade
10. Dough Blade
11. Spatula
12. Blade Storage
13. Fine Shredding Blade
14. Coarse Shredding Blade
15. Thin Slicing Blade
16. Thick Slicing Blade
17. French Fry Disc Assembly
18. Blade Holder
19. Double Chopping Blade Protector (x2)
3
OPERATING INSTRUCTIONS
Speed Control Dial
The food processor speed control dial
has two speeds settings plus "Pulse" and
"Turbo".
1 - Low
2 - High
The speed can be adjusted while the
food processor is in use.
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse" when
the unit is in the "Off" position. Use
"Turbo" when the unit is in the "On"
position and you need a burst of power.
Please note that the "Pulse" and "Turbo"
is only intended to be used for short
"bursts" of processing.
Operating the Food Processor
Setting up:
1. CAUTION: Make sure that the unit is
unplugged from the power source and
the the Speed control dial is in the
"Off" position before inserting or
removing any attachments and before
cleaning.
2. Place the food processor bowl onto
the processor body. There is no need
to turn the bowl. (Fig. 1)
3. When fitted correctly, the handle will
be to the right of the assembly, and
the ridge on the base of the bowl will
fit into the slot at the back of the
processor body. (Fig. 2)
Fig. 1
Fig. 2
5. Now you are ready to use any of the
attachments that come with the unit;
i.e. the double chopping blade, dough
blade, etc.
Using The Double Chopping Blade
Always disconnect unit from power
source before cleaning or changing
accessories.
WARNING: USE EXTREME CAUTION
WHEN HANDLING THE BLADES.
THEY ARE EXTREMELY SHARP.
ALWAYS REMOVE CHOPPING BLADE
PROTECTORS BEFORE USING.
The double chopping
blade may be
used with one
Fig. 3
blade or with
two blades.
1. To use as
a double
blade, carefully
Main Blade
slip the separate
blade over the
shaft of the
main blade.
(Fig. 3 & Fig. 4)
Fig. 4
Two Blades Together
2. Then insert onto the shaft of the
processor bowl. Always hold the
chopping blade by the upper plastic
part. (Fig. 5)
Fig. 5
4
Double
Blade
Publicité
Table des Matières
