Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
reception, which can be determined by turning the TU-508 unit off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient the radio or TV receiving antenna.
- Relocate the TU-508 unit with respect to the radio or TV receiver or vice-versa.
- Plug the TU-508 unit into a different outlet (tuner and radio or TV receiver on different circuits)
If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following flyer "Interference: Defining the Source,"
helpful. This flyer was prepared by the Federal Communications Commissions (FCC) and is available on
the website located at http://www.fcc.gov/cgb/consumerfacts/interference.html
Before You Begin
Your AMX TU-508 Digital Stereo Tuner incorporates the latest in PLL digital circuitry for reliable
performance for years to come. To get the maximum benefit from your AMX product, please read all
instructions provided with the unit.
Package Contents
(1) TU-508 Digital Stereo Tuner
(1) Remote Control
(1) Set of Rack Ears
(1) AM Radio Antenna (Loop)
(1) FM radio Antenna (Dipole)
(1) Stereo Patch Cable (RCA)
(1) User's Manual
19" Rack Ears Installation
A pair of rack ears are included to rack mount the TU-508 in a standard
19" audio/electronics rack.
1. Remove three screws from the side panel of the TU-508 toward the
front.
2. Place rack ear in proper position, paying attention to correct
alignment.
3. Reattach screws.
4. Repeat procedure for second rack ear, located on the other side of
the unit.
Important : Before installing the TU-508 in a rack, the four attached feet must be unscrewed and
removed from the bottom of the unit.
TU-508
3
Publicité
Table des Matières
