Setting The Child Lock; Display Dimmer - Gorenje BO7386BX Notice D'utilisation

• The symbol (1) and the sign (_:_ _) will fl ash. If you wish to resume cooking, press the (A)
sensor key and set a new duration if necessary.
Setting the alarm timer
The clock can also be used independently of the oven operation, as an alarm timer that sounds an
alarm after the expiration of a preset time.
• Use the (A) sensor key to select the symbol (3). Then, use the (B) and (C) sensor keys to set the
time before the alarm sounds. Maximum setting allowed is 10 hours.
• When the set time has elapsed, an intermittent beep will sound, which can be stopped by pressing
any key; if no key is pressed, the beep stops after one minute. The symbol (3) will go off.
The last minute of the timer countdown is displayed in second intervals.
Setting the beep volume (loudness)
The alarm volume can be set when no timer function is activated (only current time of day is
displayed).
• Press the (B) sensor key and hold it approximately three seconds; a volume indicator will appear,
and the corresponding sample sound will sound. "oooo" indicates maximum volume, and "o"
indicates minimum volume. Use the (B) sensor key to select among the four loudness levels.
• Confi rm the selected volume level by pressing the (A) sensor key; if the (A) sensor key is not
pressed, the setting will be confi rmed and stored automatically after a few seconds.

Setting the child lock

The clock may be locked only after one of time functions had been previously set (period of
operation, end of operation, or alarm). The oven will function normally, but you will not be able to
change settings.
Activation: Press the (A) sensor key to select the symbol (5). Use the (B) and (C) sensor keys to
activate the child lock; the display will read "ON". Confi rm the setting by pressing the (A) sensor key.
Deactivation: Press the (B) or (C) sensor to deactivate the child lock; "OFF" is displayed.
The setting must be confi rmed by pressing the (A) sensor key.

Display dimmer

One minute after the appliance is turned off, the display will be dimmed.
Deleting the timer settings
• All timer settings can be deleted any time by pressing the (B) and (C) sensor keys
simultaneously and holding them for three seconds. The set programs are automatically
interrupted and the timer switches to display of the current time of day.
• Any timer setting can also be deleted in the following way: selecting it using the (A) sensor key,
then press the (B) and (C) sensor keys simultaneously. Another way to delete a setting is by
setting the timer value to "0.00".
7