Publicité
Les langues disponibles
Les langues disponibles
LED Wiring: When hard-wiring the RGB lighting, the black lead is +12V and the red, green, and
blue leads are ground. There are seven colors available, depending on your wiring confi guration.
KICKER recommends using the KMLC lighting controller (sold separately) for more colors, patterns,
and special effects.
Color Combinations: Splice and combine the ground wires to yield a different color.
Red
Green
Blue
Red/Green
Red/Blue
Blue/Green
Red/Green/Blue
Please E-mail support@kicker.com or call Technical Services at (405) 624-8583 for specifi c or
unanswered questions.
Note: KICKER Marine speakers meet or exceed industry standards for environmental humidity and corrosion, and for
material degradation due to UV exposure. All specifi cations and performance fi gures are subject to change.
Please visit www.kicker.com for the most current information. To get the best performance from your new KICKER
Subwoofer, we recommend using genuine KICKER Accessories and Wiring. Please allow two weeks of break-in time for
the subwoofer to reach optimum performance. The use of a subsonic fi lter will signifi cantly increase the power handling.
The power handling specifi cations in these charts are calculated using a 25Hz, 24dB per octave subsonic fi lter.
2014 KM Sub Rev C.indd 5
2014 KM Sub Rev C.indd 5
Red
Green
Blue
Lime Green
Magenta
Aquamarine
Blue-White
+12V
}
Ground
5
11/6/2013 3:58:19 PM
11/6/2013 3:58:19 PM
Publicité
