Use - vidabelle VD-5537 Mode D'emploi

Use

1. Unfold the electric pad
2. Insert the connection cable plug into the socket on the electric pad
(see Page 19).
3. Plug in the power plug into a suitable power outlet.
4. Place the electric pad where you want it.
5. Press the ON/OFF button.
The display briefl y shows "8" and the control lamp lights up for a few
seconds.
6. Press the ON/OFF button.
7. Repeatedly press the button
heating level:
1 - 2
3 - 4
5 - 6
A fl ashing point next to the set heating level indicates that the
product is heating up. The point goes out when the set tempera-
ture is reached. This process may repeat several times during use.
8. To turn off the heating function, press the ON/OFF button. The dis-
play goes out.
Control
Display
Control lamp
Heating level button
ON/OFF button
low heat
medium heat
maximum heat
until the display shows the desired
20