Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EXTENSiON CORdS
Guidelines for Using Extension Cords
• If you are using an extension cord outdoors, be sure it is marked with the suffix "W-A" ("W" in Canada) to indicate
that it is acceptable for outdoor use.
• Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension
cord or have it repaired by a qualified person before using it.
• Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Extension Cord Length
Amperes
25 Feet
(At Full Load)
0–2.0
18
2.1–3.4
18
3.5–5.0
18
5.1–7.0
18
7.1–12.0
18
12.1–16.0
14
16.1–20.0
12
SPeCIFIC SAFeTY RULeS FoR CoRDLeSS
SCREWdRivERS/FLASHLiGHTS
WARNiNG:
FRoM RePeATeD USe) RePLACe STRICT ADHeReNCe To PRoDUCT SAFeTY RULeS. If
you use this tool unsafe or incorrectly, you can suffer serious personal injury!
WARNiNG:
operation where cutting tools may contact hidden wiring or its own cord. Contact with a
"live" wire will make exposed metal parts of the tool "live" and shock the operator!
• This product is for household use only.
• Do not leave the tool running.
• Do not operate flashlight in explosive atmospheres,
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Do not expose flashlight to rain or wet conditions.
• Be Aware that this tool is always in an operating condition,
have to be plugged into an electric outlet.
• When operating the tool from an elevated position,
beneath you.
• Always hold the tool firmly in your hands before switching the tool "oN".
The reaction to the torque of the motor as it accelerates to full speed may cause the tool to twist.
• Wear eye and hearing protection.
specified, everyday glasses provide only limited impact resistance, they are not safety glasses. use only certified
safety equipment; eye protection equipment should comply with ANSI z87.1 standards. Protective hearing
equipment should comply with ANSI s3.19 standards.
50 Feet
75 Feet
18
18
18
18
18
16
16
14
14
12
12
10
10
8
Do NoT LeT CoMFoRT oR FAMILIARITY WITH PRoDUCT (GAINeD
Hold tool by insulated gripping surfaces when performing an
Operate the tool only when hand-held.
100 Feet
150 Feet
18
16
14
12
10
10
8
Always use safety glasses with side shields. unless otherwise
200 Feet
16
16
14
14
12
12
12
10
8
8
8
6
6
6
such as in the presence of
because it does not
be aware of people or things
5
Publicité
Table des Matières
