Workplace; Important; Before Initial Use - Steba VK 12 Mode D'emploi

Workplace

Important:

Never place this device on or next to hot surfaces (e.g. hot sto-
ves). Only use it on a even, stable, non-metallic and a heat resi-
sting surface. It is important that no inflammable items are near
to the device. Do not place the device on the edge of the table so
that it cannot be touched by children or fall down when touched.

Before initial use:

∙ Wipe off the device with a damp towel.
∙ The sealing rings and the bag sealing bar must be clean and level, otherwise it will
not be possible to generate a vacuum.
Film rolls / bags
Use only the special rolls of film / plastic bags that are suitable for vacuuming and
sealing. If the wrong film is used it will stick to the device and damage the sealing bar.
The following special films are available from Steba, among other things.
15