Technical Data; General Notes - MZ electronic BILAC-001 Instructions D'utilisation

Description
BILAC-001 is a switch with two stainless steel sensors, which detects the
presence of water in the boat bilge and controls the drain pump.

Technical data

Switch power supply
Pump power supply
Continuous load
Maximum load
Protection rating of enclosure
Maximum operation temperature
Conductivity of drainage liquid
Size (mm)
Connection cable
Length of cable supplied
Weight (g)
Remote control panel - BILAC-002
* including cable
Warning
CONNECT ONLY TO A DC POWER SUPPLY.

General notes

The BILAC-001 must be used solely for the purposes described herein. Any
other use is to be considered improper.
Any tampering with the switch will result in immediate voiding of the
warranty.
BILAC – 001
from 10 to 30 V DC
20 A for 15 minutes
Higher than 80 µS/cm
6
English
12 – 24 V DC
15 A
IP 68
55°C (131 F)
80 x 77 x 21
3 x 1.5 mm²
750 mm
230*
optional
Rev. 04 – 2015