When using electrical extensions, make sure
that these are compatible with the power cable
and that it does not touch liquids.
Check that the vacuum cleaner has not suffered
any bumps or damages, in that case you must
ask for technical assistance to a licensed
service center.
Check that all the safety measures are present
and efficient.
Do not immerge the appliance into water and
neither use water jets to clean it.
The user can clean the machine only with a dry
cloth.
Specialized personnel must always carry out
maintenance and repairs; any damaged part
must be substituted with original spare parts.
If the machine is used properly and the
maintenance is done constantly, the engine has
a life of 800 hours (as specified by the
manufacturer), after which the vacuum stops
working. At this point you can replace worn
brushes with an original and new set of
brushes.
When you change the motor brushes you must
also replace the inner HEPA filter.
Before sending the vacuum to technical
assistance, it must be cleaned outside and
inside the tank, removing the filtering system if
contaminated, just to prevent risks to
maintenance men.
Before
any
operation
appropriate measures for one's personal safety,
for the safety of others and of the surrounding
environment (refer to the safety procedures in
the work place).
All the parts of the device must be deemed to
be contaminated when they are removed from
the area of use and appropriate action must be
taken to prevent dispersal of dust.
When maintenance or repair operations are
carried out, all contaminated elements which
cannot be cleaned well must be eliminated.
These elements must be eliminated in
impenetrable
bags
regulations applicable for the elimination of
such materials.
prepare
all
conforming
to
It is necessary to supply a proper exchange of
air in the room if the exhaust air of the device
returns into the room. Reference to national
regulations is necessary.
The dusts on the absolute filter are or could be
toxic, therefore we suggest that instruments for
personal protection be used: use gloves,
protective mask for nose and mouth, protective
glasses and a full overall to prevent
contaminated dust from making contact with
other parts of the operator's body.
Use a container suitable for disposal.
The advice mentioned is the minimum safety
requirement to be adopted. Please take note of
the safety regulations in the work place.
It is recommended to wait a few minutes (after
turning off the vacuum cleaner) before
removing the absolute filter so that any
contaminated powder be allowed to settle
inside the tank.
The dirty absolute filter is toxic waste and must
be treated as such.
For the disposal thereof please adopt the
procedures recommended by the relevant laws
in force applied at the place of use.
It is advisable to immediately place the dirty
absolute filter, dismantled from the vacuum
cleaner, into the appropriate container for
disposal.
the
the