Technical Data - Festo 8049382 Notice D'utilisation

12 Technical data

General
Operating the device
Dimensions (H x W x D in mm)
Weight
Electrical data
Input voltage
Input frequency
Input current
Protection class
Overvoltage category
Degree of contamination
Degree of efficiency
Mains connection
Output voltage
Output voltage ripple
Output current
Primary fuse
Short-circuit protection
Overload protection
Operating temperature range
Max. rel. humidity
Degree of protection
Certifications
CE marking
cCSAus
© Festo Didactic 8049630
Use only indoors, up to 2,000 m above sea level
Tabletop power supply unit, order no.
8049633
Power supply unit for ER mounting
frame, Order no. 8049382
Tabletop power supply unit (order no. 8049633) approx. 1 kg
Power supply unit for ER mounting frame (order no. 8049382) approx. 1.5 kg
110...240 V AC (±10 %)
50...60 Hz
1.0 A (110 V AC)
0.52 A (240 V AC)
1, operation with protective earthing
II, operation in building installation
2, laboratory environment
80%
IEC power connector, C13
24 V DC, 1%
150 mV
4 A
T2L/250 V
micro fuse, 5x20 mm, 2 A, 250 V, slow-blow
Switch off the switched-mode power supply
Resettable device fuse (4 A)
5...40°C/100%
80%
IP 20 (not in the ER mounting frame)
To Low Voltage Directive,
EMC Directive (EN 55011 class B)
RoHS Directive
75 x 155 x 235
170 x 240 x 92
25