Electrical Connection; Installation And Use - Kruger FTX13011PRO Instructions D'utilisation

COMMAND AND CONTROL DEVICES.
Before connecting the machine to the water
supply and to the power mains, it is essential
to know the function of the cleaner's command and
control devices.
WATER CIRCUIT CONNECTION
Connect the feed hose to the mains (fig. 8A) and to the
hosetail on the cleaner (fig. 8B).
Check that the pressure and quantity of the water
supplied by the mains are sufficient for the cleaner to
work properly: 2 to 8 BAR (29 to 116 PSI).
Maximum temperature of feeding water 50°C
(122°F).
Connect the high pressure hose to the cleaner (fig. 8C)
and to the lance (fig. 9).
IMPORTANT.
The cleaner must operate with clean water.
Dirty or sandy water, corrosive chemicals
and solvents can cause severe damage to
the cleaner.
Failure to respect the above absolves the manufactu-
rer of all liability and represents negligent use of the
product.

ELECTRICAL CONNECTION

Connection of the cleaner to the mains must be car-
ried out by skilled technicians able to ensure that all
regulations in force are complied with use in respect
of current standards and legislation.
Ensure that the mains voltage available is the same as
the voltage at which the cleaner is supposed to work;
this is indicated on the identification plate.
The electric cable must be protected from accidental
crushing.
Do not use the machine if the supply cable is dama-
ged.
The use of any electric appliance requires the
respect of some basic rules:
- Do not touch the appliance with wet or damp hands
or feet.
- Do not use the appliance bare-footed or with
unsuitable clothing.
- Do not pull the supply cable or the appliance itself
in order to disconnect the plug from the
electric supply. (For water cleaners rated at less
than 3 kW fitted with plug).
As for the protection against electric shock, the
H.P.cleaner belongs to CLASS I.
Failure to observe the above war-
ning frees the manufacturer from
all responsibility and constitutes
negligent use of the product.
G E N E R A L W A R N I N G S A B O U T

INSTALLATION AND USE

The H.P. cleaner must not be used by children,
teen-agers or incapable persons (under the
influence of alcohol, etc.)
Use only original accessories that can allow
working of the appliance.
The flexible hose connecting the lance to the H.P.
cleaner must not be damaged.
In case of damage, replace it immediately.
Hoses, connections and fittings for high pressure
systems are very important to guarantee the safety of
the H.P. cleaner. Use only original spare parts which
have the manufacturer's approval.
Do not use the H.P. cleaner when persons or animals
are in its field of action.
High pressure jets may be dangerous if not properly
used.
The jet must never be directed at persons or animals,
electric appliances or at the appliance itself.
The high pressure water jet causes a reaction power
on the lance. Hold the lance grip vigorously.
The use of the H.P. cleaner must be considered
according to the kind of washing which must be
performed.
Protect yourself against the ejection of solid materials
or corrosive substances by means of adequate protec-
tive clothing. (Gloves, goggles, etc.)
The use of the H.P. cleaner must be considered accor-
ding to the place where the washing is performed (for
example: food plants, pharmaceutical plants, etc.)
Pertinent rules and safety conditions must be fol-
lowed.
As for the protection against electric shock, the
H.P.cleaner belongs to CLASS I.
Do not direct water jets at your own or other people's
body in order to clean clothes or shoes.
While working it is forbidden, to stop the trigger (lever)
of the lance in delivery position.
Before starting any cleaning or maintenance operation,
disconnect the machine from the electric and water
supply networks.
Periodically, at least once a year, have the safety
devices checked by one of our service centres.
At least once a year, have the safety of the water clea-
ner checked by our technical service centre.
Do not use the machine if the supply cable is dama-
ged.
For the replacement of the damaged cable apply exclu-
sively to one of our technical service centres.
The supply cable of this appliance must not be replaced
by the user.
14
safe