Beta 1937M Mode D'emploi page 12

Selection and installation of accessories
1. Choose the correct rotary brush (there are 4 different rotary brushes), which will change depending on what has to be removed -
paint or rust. Choose a suitable rubber wheel for removing labels and stickers.
2. To remove paint from smooth surfaces, use a fine-grained rotary brush.
To remove heavy rust or strip paint off rough surfaces, use a coarse-grained rotary brush.
3. Use the coarse-grained and angled rotary brush with the pointed ends bent in the same direction as rotation.
4. Assemble the two flanges of the adapter by means of either the rotary brush or the rubber wheel. Make sure that both flanges have
been mounted correctly. Put the adapter onto the tool pin and fix it with the relevant screw. Use a 5-mm hexagon driver to fit the
adapter onto the pin.