ION Audio Air Lp Guide D'utilisation Rapide page 4

Air LP Speaker Features
1. Power/Volume Knob
Speaker can be powered on or off by
pressing and releasing the Power/Volume
knob.
2. Power/Volume
Power/Volume Knob LED ring will be lit
solid red when it is powered on and in
pairing mode. The LED ring will be lit solid
blue when it is connected to a Bluetooth
device.
–
3. Power Jack Connect the included 12V DC, 1.6A power supply here to power the Air LP
Speaker.
4. Aux Input – Connect a CD player, MP3 player, or other audio source to this stereo 3.5 mm (1/8")
input.
Using Air LP Speaker with Air LP
Air LP has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly.
1. Power on your Air LP turntable.
2. Press and release the Bluetooth button on Air LP to start pairing to your Bluetooth device.
3. To power on Air LP Speaker, press and release the Power/Volume knob. The Power/Volume Knob
LED ring will be solid red showing it is powered on and in pairing mode.
4. Once the Air LP turntable is connected to the Air LP Speaker, the Bluetooth LED on the Air LP
turntable will be solid. The LED ring on the Air LP Speaker will be solid blue once it is connected.
Note: Air LP will connect to the closest Bluetooth speaker that is near it. If after 5 minutes no
Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive, and
the LED will turn off.
5. Play music on your Air LP turntable.
6. Adjust the volume knob on the Air LP Speaker by rotating the knob.
7. To disconnect pairing, press and hold the Volume knob on Air LP Speaker for two seconds, or
press the Bluetooth button on Air LP Turntable. The LED ring on the Air LP Speaker will return to
red, and the Bluetooth LED on Air LP Turntable will be off.
Note: Move other Bluetooth receivers/speakers out of range of Air LP (30'/9.1m or more) or turn them
off to connect to your Bluetooth speaker.
Pairing Air LP to Other Bluetooth Speakers
Air LP has a Bluetooth transmitter to send audio to a Bluetooth speaker wirelessly.
1. Power on your Bluetooth speaker and ensure it is in pairing mode.
2. Power on the Air LP turntable.
3. Press and release the Bluetooth button on Air LP to start pairing to your Bluetooth speaker. Once
Air LP is connected to the Bluetooth speaker, the Bluetooth LED will be solid blue. Your Bluetooth
speaker should also indicate that it's paired.
Note: Air LP will connect to the closest Bluetooth speaker that is near it. If after 5 minutes no
Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become inactive, and
the LED will turn off.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0 or higher.
4. Play music on your Air LP turntable. If you are connected to a Bluetooth speaker with a play/pause
button, and do not hear audio, try pressing the play/pause button.
5. Adjust the volume on your Bluetooth device.
6. To disconnect pairing, power off the Air LP turntable or turn of Bluetooth pairing on your Bluetooth
speaker.
Note: Move other Bluetooth receivers/speakers out of range of Air LP (30'/9.1m or more) or turn them
off to connect to your Bluetooth speaker.
–
The Air LP
–
Knob LED The
1
4
2
3 4